Kabe Royal x880 LT
We offer lift kits for all motorhomes / RV from Kabe:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
![](/typo3conf/ext/spaccer_marken/Resources/Public/Images/einbau.png)
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER mobilehome/rv lift kit for your Kabe. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100 percent. The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
Model | Platform | Engine | Year of Manufacture |
---|
SPACCER fitting following suspension springs
SPACCER® will fit Kabe Royal x880 LT original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Kabe Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
![herstellerUndModellname} Kabe Royal x880 LT](/typo3conf/ext/spaccer_marken/Resources/Public/Images/suspension-lift-kit_rv.jpg)
SPACCER® improves your chassis
![book Kabe](/typo3temp/assets/_processed_/5/6/csm_buch-frontcover_a34f6be9ab.jpg)
![book Kabe](/typo3temp/assets/_processed_/0/6/csm_buch-backcover_41d9ce839b.jpg)
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
Classic 740 LBClassic 740 LGBClassic 740 LXLClassic 740 TClassic i740 LGBClassic x740 LGBClassic x740 LXLCrown i760 LGBCrown i760 LXLCrown i760 TCrown i810 LGB TandemCrown i810 LQB TandemCrown i810 LT TandemCrown i810 LXL TandemCrown i860 LGBCrown i860 LQBImperial i810 LGB TandemImperial i810 LQB TandemImperial i810 LT TandemImperial i810 LXL TandemImperial i860 LGBImperial i860 LQBImperial i910 GBImperial i910 QBImperial i910 TKABE Van 690 LBRoyal x780 LBRoyal x780 LGBRoyal x780 LQBRoyal x780 LTRoyal x780 LXLRoyal x880 LQBRoyal x880 LTOther / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.