Citroën ZX Kasten/Schrägheck

We offer lift kits for all models from Citroën:

Vehicle heightening kit for more ground clearance. A SPACCER^®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER^® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER^®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER^® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER^® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER^® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

back

Installation

Calculate

SPACCER^® offers the following benefits:

Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
Especially suitable for vehicles often used for towing trailers
Improved entry comfort
Level control for permanent loads
Enhanced body-to-tire clearance
More sportive off-road look
Also for vehicles which have been lowered
SPACCER^® comes with a TÜV test report and a detailed installation guide

Your SPACCER^® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER^® is custom-made for each spring. Therefore, SPACCER^® are always a 100 % fit for your car.

The SPACCER car lift kit for your Citroën. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants

Model	Platform	Engine	Year of Manufacture
Citroën ZX Kasten/Schrägheck 1.4	N2	1360 ccm, 55 KW, 75 PS	1994/07-1995/12
Citroën ZX Kasten/Schrägheck 1.9 D	N2	1905 ccm, 50 KW, 68 PS	1994/07-1997/06
Citroën ZX Kasten/Schrägheck 1.8	N2	1769 ccm, 44 KW, 60 PS	1993/07-1998/05

SPACCER fitting following suspension springs

SPACCER^® will fit Citroën ZX Kasten/Schrägheck original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

Citroën Original spring

Bilstein
Eibach
GKN
H&R
JOM
KW
KYB
MAD
Monroe
Sachs
TRW
Vogtland
Weitec

Please select:

SPACCER^® improves your chassis

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Other model

2 CV 2 CV AKZ Kasten/Kombi Acadiane Ami Ami Break AX Axel Berlingo Berlingo (>2018)Berlingo Kasten Berlingo Kasten/Großraumlimousine Berlingo Multispace Berlingo Pritsche/Fahrgestell Berlingo/Berlingo First Großraumlimousine Berlingo/Berlingo First Kasten Berlingo/Berlingo First Kasten/Großraumlimousine BX BX Break BX Van C-Crosser C-Crosser Enterprise C-Crosser Van C-Elysee C-Zero C1 C1 II C15 C15 Kombi C15 Pick-up C15 Pritsche/Fahrgestell C2 C2 Enterprise C25 Bus C25 Kasten C25 Pritsche/Fahrgestell C3 C3 Aircross I C3 Aircross II C3 Aircross II Van C3 II C3 III C3 III Van C3 IV C3 Kasten/Schrägheck C3 Picasso C3 Pluriel C35 Bus C35 Kasten C35 Pick-Up C4 C4 Aircross C4 Cactus C4 Cactus Van C4 Coupe C4 Grand Picasso C4 Grand Picasso I C4 Grand Picasso II C4 I C4 I Kasten/Schrägheck C4 II C4 II Kasten/Schrägheck C4 II Stufenheck C4 III C4 Picasso C4 Picasso I C4 Picasso I Großraumlimousine C4 Picasso II C4 Picasso II Van C4 Spacetourer C4 Spacetourer Van C4 Stufenheck C4 X C5 C5 Aircross C5 Break C5 I C5 I Break C5 II C5 II Break C5 III C5 III Break C5 Kasten/Kombi C5 X C6 C8 C8 Van CX I CX I Break CX II CX II Break Dispatch DS DS Break DS Cabriolet DS3 DS3 Cabriolet DS4 DS5 Dyane E-Mehari Evasion Evasion Großraumlimousine Evasion Van Grand C4 Spacetourer Grand C4 Spacetourer Van GS GS Break HY ID ID Break ID Cabriolet Jumper Jumper Bus Jumper II Kasten Jumper II Pritsche/Fahrgestell Jumper Kasten Jumper Pritsche/Fahrgestell Jumpy Jumpy Bus Jumpy III Bus Jumpy III Kasten Jumpy III Pritsche/Fahrgestell Jumpy Kasten Jumpy Pritsche/Fahrgestell LNA Mehari Nemo Kasten Nemo Kombi Saxo Saxo Hatchback Van SM Spacetourer Spacetourer Bus Traction Avant Visa Visa Cabriolet Xantia Xantia Break Xantia Kasten/Kombi XM XM Break Xsara Xsara Break Xsara Coupe Xsara Kasten Xsara Kasten/Kombi Xsara Kasten/Schrägheck Xsara Picasso ZX ZX Break ZX Kasten/Schrägheck Other / New model

back

Installation

Calculate

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER^® directly from the manufacturer on their original homepage.