Holden Torana Stufenheck

We offer lift kits for all models from Holden:

Vehicle heightening kit for more ground clearance. A SPACCER^®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER^® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER^®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER^® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER^® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER^® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

back

Installation

Calculate

SPACCER^® offers the following benefits:

Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
Especially suitable for vehicles often used for towing trailers
Improved entry comfort
Level control for permanent loads
Enhanced body-to-tire clearance
More sportive off-road look
Also for vehicles which have been lowered
SPACCER^® comes with a TÜV test report and a detailed installation guide

Your SPACCER^® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER^® is custom-made for each spring. Therefore, SPACCER^® are always a 100 % fit for your car.

The SPACCER car lift kit for your Holden. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants

Model	Platform	Engine	Year of Manufacture
Holden Torana Stufenheck 4.2 V8	LH	4142 ccm, 138 KW, 188 PS	1974/03-1976/02
Holden Torana Stufenheck 2.8	UC	2838 ccm, 78 KW, 106 PS	1978/03-1979/12
Holden Torana Stufenheck 2.3	LC	2262 ccm, 71 KW, 97 PS	1971/06-1972/01
Holden Torana Stufenheck 1.9	LX	1897 ccm, 60 KW, 82 PS	1975/01-1978/03
Holden Torana Stufenheck 1.2	HB	1158 ccm, 51 KW, 69 PS	1969/11-1972/02
Holden Torana Stufenheck 3.3	UC	3298 ccm, 101 KW, 137 PS	1978/03-1979/12
Holden Torana Stufenheck 4.2	LX	4142 ccm, 130 KW, 177 PS	1975/01-1978/03
Holden Torana Stufenheck 1.2	HB	1158 ccm, 42 KW, 57 PS	1967/05-1969/10
Holden Torana Stufenheck 2.6	LJ	2640 ccm, 88 KW, 120 PS	1972/02-1974/03
Holden Torana Stufenheck 5.0 V8	LX	5044 ccm, 186 KW, 253 PS	1975/01-1978/03
Holden Torana Stufenheck 1.6	LC	1600 ccm, 60 KW, 82 PS	1971/06-1972/01
Holden Torana Stufenheck 3.3	LX	3298 ccm, 101 KW, 138 PS	1975/01-1978/03
Holden Torana Stufenheck 2.8	LX	2838 ccm, 78 KW, 106 PS	1975/01-1978/03
Holden Torana Stufenheck 1.6	LJ	1600 ccm, 60 KW, 82 PS	1972/02-1974/03
Holden Torana Stufenheck 5.0 V8	LH	5044 ccm, 179 KW, 243 PS	1974/03-1976/02
Holden Torana Stufenheck 1.2	LJ	1158 ccm, 51 KW, 69 PS	1972/02-1974/03
Holden Torana Stufenheck 2.6	LC	2640 ccm, 85 KW, 116 PS	1971/06-1972/01
Holden Torana Stufenheck 3.0	LJ	3044 ccm, 141 KW, 192 PS	1972/02-1974/03
Holden Torana Stufenheck 1.3	TA	1253 ccm, 45 KW, 61 PS	1974/03-1975/03

SPACCER fitting following suspension springs

SPACCER^® will fit Holden Torana Stufenheck original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

Holden Original spring

Bilstein
Eibach
GKN
H&R
JOM
KW
KYB
MAD
Monroe
Sachs
TRW
Vogtland
Weitec

Please select:

SPACCER^® improves your chassis

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Other model

48/215 48/215 Stufenheck Adventra Adventra Kombi Apollo Apollo Kombi Apollo Stufenheck Astra Astra Cabriolet Astra Kombi Astra Schrägheck Astra Sportsback Astra Stufenheck Astra Twintop Barina Barina Cabriolet Barina Schrägheck Barina Spark Barina Stufenheck Calais Calais Kombi Calais Sportwagon Calais Stufenheck Calibra Camira Camira Kombi Camira Stufenheck Caprice Caprice Stufenheck Captiva Captiva 5 Captiva 7 Cascada Cascada Cabriolet Colorado Colorado 7 Colorado Pick-up Colorado Pritsche/Fahrgestell Combo Combo Kasten Commodore Commodore Kombi Commodore Pick-up Commodore Sportwagon Commodore Stufenheck Crewman Crewman Pick-up Cruze Cruze Schrägheck Cruze Stufenheck Drover Drover Pick-up E Series Epica Epica Stufenheck F Series Frontera Gemini Gemini Coupe Gemini Kasten Gemini Kombi Gemini Stufenheck H Series H Series Kasten H Series Kombi H Series Pick-up H Series Stufenheck Insignia Insignia Stufenheck Jackaroo Jackaroo/Monterey Malibu Monaro Monaro Coupe Nova Nova Schrägheck Nova Stufenheck One Tonner ONE Tonner Cab Chassis ONE Tonner Pritsche/Fahrgestell Piazza Rodeo Rodeo Pick-up Rodeo Pritsche/Fahrgestell Scurry Scurry Bus Shuttle Shuttle Kasten Statesman Statesman Stufenheck Suburban Suburban Kombi Sunbird Sunbird Stufenheck Tigra Torana Torana GTR XU1 Torana GTR XU1 Stufenheck Torana Stufenheck Trax Vectra Vectra Kombi Vectra Schrägheck Vectra Stufenheck Viva Viva Kombi Viva Schrägheck Viva Stufenheck Volt VT Station Wagon WB WB Kasten WB Pick-up Zafira Other / New model

back

Installation

Calculate

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER^® directly from the manufacturer on their original homepage.