Mazda RX-2 Stufenheck
We offer lift kits for all models from Mazda:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER car lift kit for your Mazda. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|---|---|---|
| Mazda RX-2 Stufenheck 1.1 | -- | 1146 ccm, 60 KW, 82 PS | 1973/09-1975/12 |
SPACCER fitting following suspension springs
SPACCER® will fit Mazda RX-2 Stufenheck original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Mazda Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
1000121 I121 II121 III121 III Kasten/Schrägheck121 Metro13001800 Stufenheck22 Schrägheck2 Stufenheck33 Kasten/Schrägheck3 Schrägheck3 Stufenheck323323 Astina IV323 Astina V323 Astina VI323 C IV323 C V323 F IV323 F V323 F VI323 F VI Schrägheck323 I323 I Station Wagon323 II323 II Hatchback323 III323 III Hatchback323 III Station Wagon323 IV323 P V323 Protege V323 Protege VI323 S IV323 S V323 S VI566 Hatchback6 Kasten/Kombi6 Kombi6 Schrägheck6 Sport6 Sport Kombi6 Station Wagon6 Stufenheck616626 I626 I Coupe626 II626 II Coupe626 II Hatchback626 III626 III Coupe626 III Hatchback626 III Station Wagon626 IV626 IV Hatchback626 V626 V Hatchback626 V Station Wagon8818818 Coupe818 Kombi929 I929 I Kombi929 II929 II Coupe929 II Kombi929 III929 IV929 VAZ WagonAZ1AzoffroadB-SerieB-Serie Pritsche/FahrgestellB-SeriesB-Series (Inc Bravo)B-Series BravoBianteBongo FriendeeBongo Truck Pritsche/FahrgestellBongo Van BusBongo Van KastenBT-50BT-50 II Pick-upBT-50 Pick-UpBT-50 Pritsche/FahrgestellCarolCX-3CX-30CX-5CX-5 VanCX-60CX-7CX-80CX-9DemioE BusE KastenE-Serie BusE-Serie GroßraumlimousineE-Serie KastenE-Serie Pritsche/FahrgestellE-SeriesEunos 30XFamilia IVFamilia VanFestivaFighter Pick-upFlairFlair CrossoverFlair WagonJ80 BusMilleniaMPV IMPV IIMPV IIIMX-3MX-30MX-5 IMX-5 IIMX-5 IIIMX-5 IVMX-5 RFMX-5 RF TargaMX-6Navajo Geländewagen GeschlossenPremacyPremacy VanRustlerRX 5RX 7 IRX 7 IIRX 7 II CabrioletRX 7 IIIRX 8RX-2 CoupeRX-2 StufenheckRX-4 CoupeRX-9ScrumScrum TruckSpectronTributeVerisaVX-1Xedos 6Xedos 9Other / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
