KIA Carnival II

We offer lift kits for all models from KIA:

Vehicle heightening kit for more ground clearance. A SPACCER^®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER^® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER^®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER^® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER^® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER^® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

back

Installation

Calculate

SPACCER^® offers the following benefits:

Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
Especially suitable for vehicles often used for towing trailers
Improved entry comfort
Level control for permanent loads
Enhanced body-to-tire clearance
More sportive off-road look
Also for vehicles which have been lowered
SPACCER^® comes with a TÜV test report and a detailed installation guide

Your SPACCER^® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER^® is custom-made for each spring. Therefore, SPACCER^® are always a 100 % fit for your car.

The SPACCER car lift kit for your KIA. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants

Model	Platform	Engine	Year of Manufacture
KIA Carnival II 2.9 CRDi	GQ	2902 ccm, 106 KW, 144 PS	2001/10-2006/06
KIA Carnival II 2.4	GQ	2351 ccm, 109 KW, 148 PS	2001/12-2006/10
KIA Carnival II 2.9 TDi	GQ	2903 ccm, 93 KW, 126 PS	1999/08-2007/09
KIA Carnival II 3.5	GQ	3497 ccm, 143 KW, 194 PS	2002/07-2006/04
KIA Carnival II 2.5 V6	GQ	2497 ccm, 132 KW, 180 PS	2001/10-2006/06
KIA Carnival II 2.7	GQ	2656 ccm, 124 KW, 169 PS	2004/07-2006/10
KIA Carnival II 2.5 V6	GQ	2497 ccm, 110 KW, 150 PS	2001/10-2006/06

SPACCER fitting following suspension springs

SPACCER^® will fit KIA Carnival II original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

KIA Original spring

Bilstein
Eibach
GKN
H&R
JOM
KW
KYB
MAD
Monroe
Sachs
TRW
Vogtland
Weitec

Please select:

SPACCER^® improves your chassis

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Other model

Avella Avella Schrägheck Besta Bus Besta Kasten Bongo Bus Bongo Großraumlimousine Bongo Kasten Bongo Pritsche/Fahrgestell Borrego Cadenza Cadenza I Cadenza II Carens I Carens II Carens II Großraumlimousine Carens III Carens III Großraumlimousine Carens IV Carens IV Van Carens V Großraumlimousine Carnival Carnival / Grand Carnival III Carnival I Carnival II Carnival III Carnival IV Cee`D Cee`D Combi Van Cee`D Kombi Cee`D Schrägheck Cee`D Sportswagon Cee`D SW Ceed Hatchback Van Cerato Cerato II Cerato II Stufenheck Cerato III Stufenheck Cerato IV Schrägheck Cerato Koup Cerato Koup Coupe Cerato Schrägheck Cerato Stufenheck Ceres Clarus Clarus Kombi Concord Stufenheck Credos Elan Enterprise EV6 EV9 Joice K2500 K2500 Pick-up K2700 K2900 K3600 K3600 Pritsche/Fahrgestell K8 K9 Magentis Mentor Mentor/Shuma Niro Niro II Niro Van Opirus Optima Optima Sportswagon Pegas I Picanto Picanto Hatchback Van Picanto III Picanto Runner Pregio Pregio Bus Pregio Kasten Pride Pride Kombi Pride Stufenheck Pride Van Pro Cee`D Pro Cee`D Hatchback Van Proceed Combi Van Quoris Ray Retona Retona Geländewagen Geschlossen Rio Rio II Rio II Stufenheck Rio III Rio III Hatchback Van Rio III Stufenheck Rio IV Rio IV Hatchback Van Rio IV Stufenheck Rio Kombi Rio Schrägheck Rio Stufenheck Rio X-Line IV Schrägheck Roadster Rondo III Rondo IV Sedona Seltos Sephia Sephia Stufenheck Shuma Shuma II Shuma II Stufenheck Shuma Stufenheck Sonet Sorento Sorento I Sorento I Van Sorento II Sorento II Kasten/SUV Sorento III Sorento IV Soul Soul II Soul III Soul III Cargo Spectra II Sportage Sportage SUV Sportage V Sportage Van Stinger Stinger Hatchback Van Stonic Stonic Hatchback Van Telluride Towner Bus Towner Kasten Trade Pritsche/Fahrgestell Venga Venga Hatchback Van Vigato Visto Xceed Xceed Van Other / New model

back

Installation

Calculate

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER^® directly from the manufacturer on their original homepage.