Skip to main content
Maserati

Maserati Biturbo Coupe

We offer lift kits for all models from Maserati:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Maserati. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
Maserati Biturbo Coupe 222 E70, 772790 ccm, 182 KW, 247 PS1989/01-1989/10
Maserati Biturbo Coupe 2.5AM 3312491 ccm, 139 KW, 189 PS1982/06-1987/10
Maserati Biturbo Coupe 2.0AM 3311996 ccm, 136 KW, 184 PS1985/07-1987/04
Maserati Biturbo Coupe 22270, 771996 ccm, 162 KW, 220 PS1989/01-1992/12
Maserati Biturbo Coupe 2.5AM 3312491 ccm, 147 KW, 200 PS1983/09-1986/12
Maserati Biturbo Coupe 2.8AM 3312790 ccm, 165 KW, 224 PS1986/08-1993/06
Maserati Biturbo Coupe 2.0AM 3311996 ccm, 208 KW, 283 PS1990/04-1992/12
Maserati Biturbo Coupe S 2.0AM 3311996 ccm, 151 KW, 205 PS1981/12-1987/02
Maserati Biturbo Coupe 2.24V70, 771996 ccm, 180 KW, 245 PS1989/03-1993/06
Maserati Biturbo Coupe 222 SE70, 772790 ccm, 165 KW, 224 PS1989/11-1990/12
Maserati Biturbo Coupe Si 2.0AM 3311996 ccm, 151 KW, 205 PS1987/09-1988/12
SPACCER fitting following suspension springs

SPACCER® will fit Maserati Biturbo Coupe original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Maserati Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Maserati Biturbo Coupe
SPACCER® improves your chassis
book Maseratibook Maserati

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: