Subaru Legacy I
We offer lift kits for all models from Subaru:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER car lift kit for your Subaru. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|---|---|---|
| Subaru Legacy I 2000 Turbo 4WD | BC | 1994 ccm, 147 KW, 200 PS | 1992/05-1994/07 |
| Subaru Legacy I 1800 4WD | BC | 1820 ccm, 76 KW, 103 PS | 1989/01-1991/09 |
| Subaru Legacy I 1800 | BC | 1820 ccm, 76 KW, 103 PS | 1989/01-1993/12 |
| Subaru Legacy I 2000 4WD | BC | 1994 ccm, 85 KW, 116 PS | 1991/08-1994/07 |
| Subaru Legacy I 2.0 | BC | 1994 ccm, 85 KW, 116 PS | 1991/08-1993/12 |
| Subaru Legacy I 2200 4WD | BC | 2212 ccm, 100 KW, 136 PS | 1989/01-1994/07 |
| Subaru Legacy I 2.0 GL | BC | 1994 ccm, 103 KW, 140 PS | 1991/08-1993/12 |
| Subaru Legacy I 1.6 | BC | 1597 ccm, 70 KW, 95 PS | 1989/05-1993/12 |
SPACCER fitting following suspension springs
SPACCER® will fit Subaru Legacy I original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Subaru Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
Baja Pick-upBrumbyBRZCrosstrekDias WagonEvoltisExigaFioriForesterImprezaImpreza CoupeImpreza SchrägheckImpreza Station WagonImpreza StufenheckJusty IJusty I Kasten/SchrägheckJusty IIJusty IIIJusty IVLegacy ILegacy I Station WagonLegacy IILegacy II Station WagonLegacy IIILegacy III Station WagonLegacy IVLegacy IV Station WagonLegacy OutbackLegacy VLegacy V Station WagonLegacy VILeone ILeone I HardtopLeone I HatchbackLeone I Station WagonLeone IILeone II HatchbackLeone II Station WagonLeone IIILeone SchrägheckLeone/Loyale CoupeLevorgLibero BusLibero KastenLibertyLiberty ILiberty IILiberty IIILiberty IVLiberty OutbackLiberty VMVOutbackPleoPleo PlusPleo VanRex IRex IIRex IIISambar Truck Pritsche/FahrgestellSambar Van BusSambar Van Pick-upSherpa IISolterraStellaSVXTreziaTribecaVivioVortex TXWRXWRX SchrägheckWRX StufenheckXT CoupeXVOther / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
