Skip to main content
Holden

Holden Caprice Stufenheck

We offer lift kits for all models from Holden:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Holden. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
Holden Caprice Stufenheck 6.0i V8WL5967 ccm, 260 KW, 354 PS2006/02-2006/07
Holden Caprice Stufenheck 3.8i V6WK3791 ccm, 152 KW, 207 PS2003/05-2004/07
Holden Caprice Stufenheck 3.8i V6VR3791 ccm, 130 KW, 177 PS1994/03-1995/04
Holden Caprice Stufenheck 5.7i V8WH5665 ccm, 225 KW, 306 PS2000/10-2003/04
Holden Caprice Stufenheck 3.6i V6WL3565 ccm, 190 KW, 258 PS2004/08-2006/07
Holden Caprice Stufenheck 3.8i V6 SuperchargedWK3791 ccm, 171 KW, 233 PS2003/05-2004/07
Holden Caprice Stufenheck 5.0i V8VR4987 ccm, 165 KW, 224 PS1994/03-1995/04
Holden Caprice Stufenheck 5.7i V8WL5665 ccm, 250 KW, 340 PS2004/08-2006/01
Holden Caprice Stufenheck 3.8i V6WH3791 ccm, 152 KW, 207 PS2001/08-2003/04
Holden Caprice Stufenheck 5.0i V8VQ4987 ccm, 165 KW, 224 PS1990/04-1993/07
Holden Caprice Stufenheck 3.6i V6WM3565 ccm, 195 KW, 265 PS2006/07-2013/08
Holden Caprice Stufenheck 5.0i V8VS4987 ccm, 168 KW, 228 PS1995/04-1999/06
Holden Caprice Stufenheck 3.8i V6WH3791 ccm, 147 KW, 200 PS1999/06-2001/08
Holden Caprice Stufenheck 3.8i V6 SuperchargedVS3791 ccm, 165 KW, 224 PS1996/10-1999/06
Holden Caprice Stufenheck 5.7i V8WK5665 ccm, 245 KW, 333 PS2003/05-2004/07
Holden Caprice Stufenheck 3.8i V6VS3791 ccm, 147 KW, 200 PS1995/04-1998/05
Holden Caprice Stufenheck 5.7i V8WH5665 ccm, 220 KW, 299 PS1999/06-2000/10
Holden Caprice Stufenheck 6.0i V8WM5967 ccm, 270 KW, 367 PS2006/08-2013/08
Holden Caprice Stufenheck 3.8i V6 SuperchargedWH3791 ccm, 171 KW, 233 PS1999/06-2001/08
SPACCER fitting following suspension springs

SPACCER® will fit Holden Caprice Stufenheck original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Holden Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Holden Caprice Stufenheck
SPACCER® improves your chassis
book Holdenbook Holden

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: