Volvo 164
We offer lift kits for all models from Volvo:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER car lift kit for your Volvo. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|---|---|---|
| Volvo 164 2.9 E | 164 | 2978 ccm, 96 KW, 131 PS | 1968/08-1973/07 |
| Volvo 164 3.0 | 164 | 2978 ccm, 106 KW, 144 PS | 1968/09-1972/12 |
| Volvo 164 2.9 | 164 | 2978 ccm, 118 KW, 160 PS | 1972/08-1974/07 |
SPACCER fitting following suspension springs
SPACCER® will fit Volvo 164 original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Volvo Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
140140 Kombi164240240 Kombi260260 Coupe260 Kombi340-360340-360 Stufenheck440 K460 L480 E6666 Kombi740740 Kombi760760 Kombi780850850 Kombi940940 II940 II Kombi940 Kombi960960 II960 II Kombi960 KombiC30C303C40C70 IC70 I CabrioletC70 I CoupeC70 IIC70 II CabrioletDuettEX30EX90P 121P 122 S AmazonP 122 S Amazon KombiP 1800P 210 DuettP 2200P 2200 KombiP 544PV 444 StufenheckPV 445 DuettPV 544S40 IS40 IIS60S60 IS60 IIS60 II Cross CountryS60 IIIS70S80S80 IS80 IIS90S90 IIV40V40 Cross CountryV40 Kasten/SchrägheckV40 KombiV40 SchrägheckV50V60V60 IV60 I Cross CountryV60 IIV60 II Cross CountryV60 Kasten/KombiV70 IV70 I KombiV70 IIV70 II KombiV70 IIIV70 III KombiV70 Kasten/KombiV90V90 IIV90 II Cross CountryV90 II KombiV90 KombiXC 90XC40XC40 CCXC60XC60 I VanXC60 IIXC70 Cross CountryXC70 IIXC70 II VanXC90 IXC90 I VanXC90 IIOther / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
