Skip to main content
BMW

BMW 6 Gran Coupe

We offer lift kits for all models from BMW:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your BMW. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
BMW 6 Gran Coupe 640iF062979 ccm, 235 KW, 320 PS2012/03-2018/10
BMW 6 Gran Coupe 640dF062993 ccm, 230 KW, 313 PS2012/03-2018/10
BMW 6 Gran Coupe 650i xDriveF064395 ccm, 330 KW, 449 PS2012/07-2018/10
BMW 6 Gran Coupe M6 CompetitionF064395 ccm, 441 KW, 600 PS2015/03-2018/10
BMW 6 Gran Coupe M6F064395 ccm, 412 KW, 560 PS2013/03-2018/10
BMW 6 Gran Coupe 640d xDriveF062993 ccm, 230 KW, 313 PS2013/03-2018/10
BMW 6 Gran Coupe 650iF064395 ccm, 330 KW, 449 PS2012/07-2018/10
BMW 6 Gran Coupe 640i xDriveF062979 ccm, 235 KW, 320 PS2013/03-2018/10
BMW 6 Gran Coupe M6 CompetitionF064395 ccm, 423 KW, 575 PS2013/07-2015/02
SPACCER fitting following suspension springs

SPACCER® will fit BMW 6 Gran Coupe original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • BMW Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
BMW 6 Gran Coupe
SPACCER® improves your chassis
book BMWbook BMW

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: