Alfa Romeo AR 6 Bus
We offer lift kits for all models from Alfa Romeo:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER car lift kit for your Alfa Romeo. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|---|---|---|
| Alfa Romeo AR 6 Bus 1.9 D | 280 | 1929 ccm, 51 KW, 69 PS | 1985/04-1989/12 |
SPACCER fitting following suspension springs
SPACCER® will fit Alfa Romeo AR 6 Bus original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Alfa Romeo Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
145146147155156156 Sportwagon159159 Sportwagon1641661750-2000190023002600 Berlina2600 Spider2600 Sprint3333 Sportwagon4C4C Spider6758C8C Spider90A11 / A12 Pritsche/FahrgestellAlfasudAlfasud GiardinettaAlfasud SprintAlfettaAlfetta GTAR 6 BusAR 6 KastenAR 8 KastenAR 8 Pritsche/FahrgestellArnaBerlinaBreraDisco VolanteF11 / F12 BusF11 / F12 KastenFNM 2000GiuliaGiulia GTGiulia SpiderGiuliettaGiulietta BerlinaGiulietta CoupeGiulietta KastenGiulietta Kasten/SchrägheckGiulietta KombiGiulietta PanoramaGiulietta SpiderGiulietta SprintGiulietta Sprint SpecialeGiulietta SZGTGTA CoupeGTVJuniorMatta Geländewagen OffenMitoMontrealRomeo 2 BusRomeo 2 KastenRZSpiderStelvioSZTonaleOther / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
