Volvo P 1800
We offer lift kits for all models from Volvo:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER car lift kit for your Volvo. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
Model | Platform | Engine | Year of Manufacture |
---|---|---|---|
Volvo P 1800 1.8 | P18 | 1767 ccm, 76 KW, 103 PS | 1962/04-1970/05 |
Volvo P 1800 1.8 S | P18 | 1767 ccm, 71 KW, 97 PS | 1962/04-1970/05 |
Volvo P 1800 2.0 ES | P18 | 1954 ccm, 91 KW, 124 PS | 1972/04-1973/11 |
Volvo P 1800 1.8 | P18 | 1780 ccm, 75 KW, 102 PS | 1966/09-1968/12 |
Volvo P 1800 1.8 | P18 | 1767 ccm, 66 KW, 90 PS | 1962/04-1970/05 |
Volvo P 1800 2.0 | P18 | 1986 ccm, 88 KW, 120 PS | 1969/09-1973/11 |
SPACCER fitting following suspension springs
SPACCER® will fit Volvo P 1800 original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Volvo Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
140140 Kombi164240240 Kombi260260 Coupe260 Kombi340-360340-360 Stufenheck440 K460 L480 E6666 Kombi740740 Kombi760760 Kombi780850850 Kombi940940 II940 II Kombi940 Kombi960960 II960 II Kombi960 KombiC30C303C40C70 IC70 I CabrioletC70 I CoupeC70 IIC70 II CabrioletDuettEC40EX30EX40EX90P 121P 122 S AmazonP 122 S Amazon KombiP 1800P 210 DuettP 2200P 2200 KombiP 544PV 444 StufenheckPV 445 DuettPV 544S40 IS40 IIS60S60 IS60 IIS60 II Cross CountryS60 IIIS70S80S80 IS80 IIS90S90 IIV40V40 Cross CountryV40 Kasten/SchrägheckV40 KombiV40 SchrägheckV50V60V60 IV60 I Cross CountryV60 IIV60 II Cross CountryV60 Kasten/KombiV70 IV70 I KombiV70 IIV70 II KombiV70 IIIV70 III KombiV70 Kasten/KombiV90V90 IIV90 II Cross CountryV90 II KombiV90 KombiXC 90XC40XC40 CCXC60XC60 I VanXC60 IIXC70 Cross CountryXC70 IIXC70 II VanXC90 IXC90 I VanXC90 IIOther / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.