Hyundai I10 III Stufenheck
We offer lift kits for all models from Hyundai:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER car lift kit for your Hyundai. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|---|---|---|
| Hyundai I10 III Stufenheck 1.2 MPi | AI3 | 1197 ccm, 61 KW, 83 PS | 2020/02-2024/12 |
| Hyundai I10 III Stufenheck 1.0 T-GDi | AI3 | 998 ccm, 74 KW, 101 PS | 2020/02-2024/12 |
SPACCER fitting following suspension springs
SPACCER® will fit Hyundai I10 III Stufenheck original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Hyundai Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
AccentAccent IAccent I StufenheckAccent IIAccent II StufenheckAccent IIIAccent III StufenheckAccent IVAccent IV StufenheckAccent Kasten/SchrägheckAccent StufenheckAccent V SchrägheckAlcazar SUVAslanAtosAtos PrimeBayonCentennialChorus IICoupeCretaDynastyElantraElantra CoupeElantra III StufenheckElantra IV KombiElantra LavitaElantra StufenheckElantra V KombiElantra VII StufenheckEONEquus / CentennialExcelGalloper IGalloper IIGenesisGenesis CoupeGetzGrace BusGrace KastenGrand AvegaGrand Santa FéGrandeurGrandeur IIH-1H-1 / StarexH-1 CargoH-1 KastenH-1 Pritsche/FahrgestellH-1 StarexH-1 TravelH-1/Starex BusH-1/Starex GroßraumlimousineH100 BusH100 KastenH100 Pick-upH100 Pritsche/FahrgestellH350 BusH350 KastenH350 Pritsche/FahrgestellHB20S StufenheckHighway VanI10I10 II CargoI10 III StufenheckI10 StufenheckI20I20 ActiveI20 Coupei20 Hatchback VanI30i30 Combi Vani30 CoupeI30 CWi30 Fastbacki30 Hatchback Vani30 Kombii30 Kombi VanI40I40 CWi40 Kombi Vani45 VIIloadiMaxIoniqIoniq 5Ioniq 6IX20IX35iX35 VanIX55KonaKona Kasten/SUVLantra ILantra IILantra II KombiLantra II WagonMarciaMatrixNexoPalisadePonyPony StufenheckPony WagonPony/Excel StufenheckPorter BusPorter KastenPorter Pick-UpPorter Pritsche/FahrgestellSS CoupeSanta FeSanta Fé ISanta Fe ISanta Fé I Kasten/SUVSanta Fé IISanta Fe IISanta Fé II Kasten/SUVSanta Fé IIISanta Fe IIISanta Fé III Kasten/SUVSanta Fé IVSanta Fé IV Kasten/SUVSantamoSolaris StufenheckSonata IISonata IIISonata IVSonata VSonata VISonata VIISonata VIIIStarexStaria BusStaria KastenStellarTerracanTiburonTiburon CoupeTrajetTrajet Kasten/GroßraumlimousineTucsonTucson Kasten/SUVVelosterVenueVistoXGXG StufenheckOther / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
