Skip to main content
Mercedes-Benz

Mercedes-Benz Vito 4x4

We offer lift kits for all models from Mercedes-Benz:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Mercedes-Benz. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
SPACCER fitting following suspension springs

SPACCER® will fit Mercedes-Benz Vito 4x4 original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Mercedes-Benz Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Mercedes-Benz Vito 4x4
SPACCER® improves your chassis
book Mercedes-Benzbook Mercedes-Benz

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Other model

/8/8 Coupe100 Bus100 Kasten100 Pritsche/Fahrgestell123 Stufenheck123 T-Model124 Coupe124 Stufenheck124 T-Model170170 Cabriolet170 Kasten/Kombi170 Pritsche/Fahrgestell190300 Cabriolet A300 Cabriolet D300 Coupe300 Roadster300 StufenheckA-ClassA-KlasseA-Klasse StufenheckAMG GTAMG GT / GT SAMG GT RoadsterB-ClassB-KlasseC Klasse T-ModelC-ClassC-Class T-ModelC-KlasseC-Klasse ALL-TerrainC-Klasse CabrioletC-Klasse CoupeC-Klasse KombiC-Klasse SportcoupeCabrioletCitan KastenCitan Kasten/GroßraumlimousineCitan KombiCitan Kombi/TourerCitan MixtoCitan Mixto (Double Cabin)Citan TourerCLACLA CoupeCLA Shooting BrakeCLC-ClassCLC-KlasseCLECLE CabrioletCLKCLK CabrioletCLSCLS Shooting BrakeCoupeE-ClassE-Class T-ModelE-KlasseE-Klasse ALL-TerrainE-Klasse CabrioletE-Klasse CoupeE-Klasse KombiE-Klasse Pritsche/FahrgestellE-Klasse T-ModelE300TDTE500EQAEQBEQCEQEEQE SUVEQSEQS SUVEQTEsprinter KastenG-ClassG-KlasseG-Klasse CabrioG-Klasse Geländewagen GeschlossenG-Klasse Geländewagen OffenG-Klasse Pritsche/FahrgestellG-Klasse Station WagonGL-ClassGL-KlasseGLAGLA-ClassGLA-KlasseGLBGLCGLC CoupeGLEGLE CoupeGLK-KlasseGLSGullwingHeckflosseHenschel 2-TKombiKombi KombiKombi T-ModelM-ClassM-KlasseMarco Polo CamperMB100MB100 KastenMB140MetrisMetris 4x4PagodePontonPullmannR-ClassR-KlasseS-ClassS-KlasseS-Klasse CabrioletS-Klasse CoupeS-Klasse StufenheckSaloonSedanSLSL CoupeSLCSLKSLRSLR RoadsterSLS AmgSLS Amg CabrioletSLS AMG RoadsterSprinter 2-TSprinter 2-T BusSprinter 2-T KastenSprinter 2-T Pritsche/FahrgestellSprinter 3-TSprinter 3-T BusSprinter 3-T KastenSprinter 3-T Pritsche/FahrgestellSprinter 3,5 Pritsche/FahrgestellSprinter 3,5-T BusSprinter 3,5-T KastenSprinter 3,5-T Pritsche/FahrgestellSprinter 3.5-TSprinter 4-TSprinter 4-T BusSprinter 4-T KastenSprinter 4-T Pritsche/FahrgestellSprinter 4-T Tourer BusSprinter 4,6-T BusSprinter 4,6-T KastenSprinter 4,6-T Pritsche/FahrgestellSprinter 4.6-TSprinter 5-TSprinter 5-T BusSprinter 5-T KastenSprinter 5-T Pritsche/FahrgestellSprinter 5-T Tourer BusSprinter Classic 3,5-T KastenSprinter Classic 4,6-T BusSprinter Classic 4,6-T KastenSprinter KipperSprinter Pritsche/FahrgestellStufenheckT-Klasse GroßraumlimousineT1 BusT1 KastenT1 Pritsche/FahrgestellT1/TN KastenT1/TN Kasten/KombiT1/TN Pritsche/FahrgestellT2/L KastenT2/L Kasten/KombiT2/L KipperT2/L KommunalfahrzeugT2/L Pritsche/FahrgestellT2/L SattelschlepperT2/LN1 BusT2/LN1 KastenT2/LN1 Kasten/KombiT2/LN1 KipperT2/LN1 Pritsche/FahrgestellT2/LN1 TriebkopfV-ClassV-KlasseV-KlasseV-Klasse 4x4V-Klasse KastenVaneoVario BusVario KastenVario Kasten/KombiVario KipperVario Pritsche/FahrgestellVario TriebkopfVianoVitoVito / Mixto KastenVito / Mixto Kasten 4x4Vito 4x4Vito BusVito Bus 4x4Vito KastenVito MixtoVito Mixto (Double Cabin)Vito Mixto 4x4Vito TourerVito Tourer 4x4X-KlasseX-Klasse Pritsche/FahrgestellOther / New model

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: