Aston Martin DBS Vantage
We offer lift kits for all models from Aston Martin:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER car lift kit for your Aston Martin. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|---|---|---|
| Aston Martin DBS Vantage 4.0 | -- | 3995 ccm, 210 KW, 286 PS | 1966/01-1972/12 |
| Aston Martin DBS Vantage 6.0 V12 | -- | 5935 ccm, 380 KW, 517 PS | 2007/09-2023/12 |
| Aston Martin DBS Vantage 5.3 | -- | 5340 ccm, 235 KW, 320 PS | 1968/10-1972/08 |
SPACCER fitting following suspension springs
SPACCER® will fit Aston Martin DBS Vantage original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Aston Martin Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
CygnetDB11DB11 VantageDB11 VolanteDB12DB12 VolanteDB6DB6 VantageDB6 VolanteDB7DB7 VantageDB7 VolanteDB9DB9 VantageDB9 VolanteDBSDBS CoupeDBS VantageDBS VolanteDBXLagonda ILagonda I Shooting BrakeOne-77RapideTickford CapriV12 SpeedsterV12 VantageV8 VantageV8 Vantage RoadsterV8 VolanteValhallaValkyrieValourVanquishVanquish VantageVanquish VolanteVantageVantage CoupeVantage RoadsterVantage VantageVantage VolanteVirage Limited EditionVirage SaloonVirage Shooting BrakeVirage VantageVirage VolanteZagato VantageZagato VolanteOther / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
