Acura MDX
We offer lift kits for all models from Acura:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER car lift kit for your Acura. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|---|---|---|
| Acura MDX 3.5 AWD | YD1 | 3471 ccm, 186 KW, 253 PS | 2005/08-2006/09 |
| Acura MDX 3.5i-VTEC AWD | YD3 | 3471 ccm, 213 KW, 290 PS | 2014/01-2017/12 |
| Acura MDX 3.5 | YD3 | 3471 ccm, 216 KW, 294 PS | 2013/11-2013/12 |
| Acura MDX 3.5 AWD | YD3 | 3471 ccm, 215 KW, 292 PS | 2013/11-2023/12 |
| Acura MDX 3.5 AWD | YD1 | 3471 ccm, 193 KW, 262 PS | 2000/08-2005/12 |
| Acura MDX 3.7 AWD | YD2 | 3664 ccm, 227 KW, 309 PS | 2006/10-2023/12 |
| Acura MDX 3.7 AWD | YD2 | 3664 ccm, 220 KW, 299 PS | 2006/10-2013/04 |
| Acura MDX 3.5 AWD | YD1 | 3471 ccm, 179 KW, 243 PS | 2001/03-2005/12 |
| Acura MDX 3.7 AWD | YD2 | 3664 ccm, 224 KW, 305 PS | 2006/10-2013/04 |
| Acura MDX 3.5 AWD | YD1 | 3471 ccm, 198 KW, 269 PS | 2003/09-2006/04 |
| Acura MDX 3.0 Hybrid AWD | YD | 2997 ccm, 240 KW, 326 PS | 2017/04-2024/12 |
| Acura MDX 3.5 AWD | YD1 | 3471 ccm, 194 KW, 264 PS | 2002/09-2003/12 |
| Acura MDX 3.5 AWD | YD1 | 3471 ccm, 195 KW, 265 PS | 2000/08-2005/12 |
| Acura MDX 3.0 Hybrid AWD | YD | 2997 ccm, 239 KW, 325 PS | 2017/11-2024/12 |
| Acura MDX 3.5 SH-AWD | YD, YE | 3471 ccm, 216 KW, 294 PS | 2021/10-2024/12 |
| Acura MDX 3.5 AWD | YD | 3471 ccm, 216 KW, 294 PS | 2013/11-2024/12 |
| Acura MDX 3.5 | YD, YE | 3471 ccm, 216 KW, 294 PS | 2021/10-2024/12 |
| Acura MDX 3.0 SH-AWD | YD, YE | 2997 ccm, 264 KW, 359 PS | 2021/10-2024/12 |
| Acura MDX 3.5 | YD, YE | 3471 ccm, 213 KW, 290 PS | 2021/10-2024/12 |
SPACCER fitting following suspension springs
SPACCER® will fit Acura MDX original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Acura Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
CL CoupeILX StufenheckIntegra CoupeIntegra SchrägheckIntegra StufenheckLegendLegend CoupeLegend IILegend II CoupeLegend IIIMDXNSXNSX TargaRDXRLRLXRSX CoupeSLXTLTLXTSXTSX KombiVigorZDXOther / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
