Skip to main content
Jeep

Jeep Commander

We offer lift kits for all models from Jeep:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Jeep. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
Jeep Commander 4.7 V8 4x4XH, XK4701 ccm, 170 KW, 231 PS2005/09-2010/12
Jeep Commander 3.7 V6 4x4XH, XK3701 ccm, 157 KW, 214 PS2005/09-2010/12
Jeep Commander 4.7 V8 4x4XH, XK4701 ccm, 223 KW, 303 PS2008/01-2009/12
Jeep Commander 3.0 CRD 4x4XH, XK2987 ccm, 155 KW, 211 PS2005/09-2010/12
Jeep Commander 5.7 HEMI 4x4XH, XK5654 ccm, 255 KW, 347 PS2009/06-2010/12
Jeep Commander 3.0 CRD 4x4XH, XK2987 ccm, 160 KW, 218 PS2006/04-2010/12
Jeep Commander 5.7 V8 4x4XH, XK5654 ccm, 240 KW, 326 PS2005/09-2010/12
Jeep Commander 1.3 T2706711332 ccm, 127 KW, 173 PS2021/10-2024/12
Jeep Commander 1.3 T270 Turbo Flex6711332 ccm, 136 KW, 185 PS2021/10-2024/12
Jeep Commander 2.0 TD380 4WD6711956 ccm, 125 KW, 170 PS2021/10-2024/12
SPACCER fitting following suspension springs

SPACCER® will fit Jeep Commander original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Jeep Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Jeep Commander
SPACCER® improves your chassis
book Jeepbook Jeep

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: