Peugeot 208 Kasten
We offer lift kits for all models from Peugeot:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER car lift kit for your Peugeot. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|
SPACCER fitting following suspension springs
SPACCER® will fit Peugeot 208 Kasten original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Peugeot Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
1007104104 Coupe106 I106 II106 Van106 Van I Kasten/Schrägheck10710820082008 I2008 I Van2008 II204204 Break204 Cabriolet204 Coupe205205 I205 I Cabriolet205 II205 Kasten205 Kasten/Schrägheck206206 CC206 Schrägheck206 Stufenheck206 SW206 Van206+207207 CC207 Kasten/Schrägheck207 Stufenheck207 SW207 SW Kasten/Kombi207 Van208208 I208 II208 Kasten208 Kasten/Schrägheck30083008 Großraumlimousine3008 III3008 SUV3008 Van301304304 Break304 Cabriolet304 Coupe305 I305 I Break305 II305 II Break305 Kasten/Kombi306306 Break306 Cabriolet306 Kasten/Kombi306 Kasten/Schrägheck306 Schrägheck306 Van307307 Break307 CC307 Stufenheck307 SW307 SW Kasten/Kombi308308 CC308 I308 II308 III308 Kasten/Schrägheck308 SW308 SW I308 SW II308 SW II Kasten/Kombi308 SW III308 SW Kasten/Kombi309 I309 II309 Kasten/Schrägheck40074007 Van4008404404 Cabriolet404 Kombi405405 I405 I Break405 I Kasten/Kombi405 II405 II Break405 II Kasten/Kombi406406 Break406 Coupe407407 Coupe407 SW407 SW Kasten/Kombi408408 II50085008 I Van5008 II5008 II Van5008 III504504 Break504 Cabriolet504 Coupe504 Pick-Up505505 Break508508 I508 II508 SW508 SW I508 SW II508 SW Kasten/Kombi604605607806806 Van807807 VanBipperBipper TepeeBoxerBoxer BusBoxer KastenBoxer Pritsche/FahrgestellExpertExpert BusExpert KastenExpert Pritsche/FahrgestellExpert TepeeIonJ5 BusJ5 KastenJ5 Pritsche/FahrgestellJ7 BusJ7 KastenJ7 Pritsche/FahrgestellJ9 BusJ9 KastenJ9 Pritsche/FahrgestellLandtrekPartnerPartner (>2018)Partner CombispacePartner KastenPartner Kasten/GroßraumlimousinePartner Origin CombispacePartner Origin KastenPartner Origin Kasten/GroßraumlimousinePartner Pritsche/FahrgestellPartner TepeeRCZRifterTravellerTraveller BusOther / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
